Waring CTS1000 Instructions d'exploitation télécharger pdf (Page 7)

OPERATION INSTRUCTIONS

Initial Preparation

• Place Waring

™

Commercial Conveyor Toaster on level

countertop with a minimum of a 2" clearance between

the side and back walls.

NOTE: If unit is not seated properly, the feet are

adjustable for balancing.

• Remove all parts (reector/crumb tray and toast drawer)

and clean thoroughly before rst use.

• Replace all parts and plug unit into appropriate outlet

(see previous page).

• Switch unit to the On position. The red Power On

indicator light will illuminate.

IMPORTANT: Make sure the standby switch is in the

Full power position (to the left).

• When conveyor toaster is ready for toasting, the green

Ready indicator light will illuminate. This should take

approximately 5 minutes.

• Turn the conveyor speed control knob to set the desired

toasting speed.

• When the main power switch is turned to the OFF

position, the cooling fan and green ready indicator light

may stay on up to 15 minutes for cooling.

Toasting

• Place bread, bagel or mufn to be toasted on wire

bread feeder. The conveyor toaster will automatically pull

bread into the toasting chamber at the speed set by the

conveyor speed control knob.

• When complete, toast will slide down bread chute into the

toast drawer.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

Waring CTS1000 Instructions d'exploitation Page 7