Waring WFP14S Manuel d'utilisateur télécharger pdf (Page 8)

(batch bowl assembly continued)

Note: Do not put any food in the bowl before placing the accessory disc onto the shaft.

• Place the cover on the bowl, with the feed tube on the left, slightly toward the front. The locking

tabs on the cover should be at the left of the locking tabs on the rim of the work bowl.

• Rotate the cover counterclockwise to lock it into place. When the cover is rotated into place, the

safety interlock tab on the back rim of the cover will activate the interlock mechanism and your food

processor is ready to operate.

NOTE: The cover must be in place correctly, with the cover’s safety interlock tab firmly engaged, for

the food processor to operate. This is an important safety feature.

NEVER ATTEMPT TO START THE FOOD

PROCESSOR WITHOUT THE COVER LOCKED

INTO POSITION.

Two pushers for feed tube

Pick up the large food pusher and the small food pusher.

The large pusher is for processing larger vegetables. The smaller

pusher nests in the larger pusher and can be used for smaller

vegetables, guiding long thin vegetables for more precise cuts,

or for jobs like slicing pepperoni.

Large pusher

Insert the small food pusher into the large food pusher opening.

When it is fully inserted, rotate the small pusher clockwise to

lock it into place. Now you are ready to insert the large pusher

into the feed tube opening. Drop the pusher into the feed

tube gently.

Small pusher

To use the small pusher, rotate it counterclockwise to disengage

the locking feature. Now you can lift the small pusher up and

out of the large pusher. When using the small pusher, the large

pusher becomes the feed tube for the small pusher.

10wc116297_wfp14s_wfp11s_ib.indd 8 8/11/10 1:10:33 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

Pas de commentaire

Waring WFP14S Manuel d'utilisateur Page 8